Millennium Lock Residential - 3000 Series - PB Instruction Manual download pdf

The Ultimate Lock™ 3000 Series Installation Guide

a. This lock is designed for a right- or left-handed door that opens into the home or ofce with a deadbolt

currently installed at a 2-3/8" or 2-3/4" backset (centered from the edge of the door). It can be installed on an

outward swinging door, but special instructions are required. See www.TheUltimateLock.com for details.

b. To provide maximum protection, The Ultimate Lock™ should be installed in a solid 1-3/4” thick wood door or

steel-skinned, insulation or foam lled door mounted in a double studded door frame.

c. If your door does not already have a deadbolt installed, it is highly recommended that you purchase an

installation jig kit for deadbolts and door handles. These kits include special hole saws, templates, and other aids

to simplify the installation process. If your door has a metal skin, be sure your kit includes Bi-Metal hole saws to

cut the metal door.

If your door jamb/frame is steel, do not remove the hinge screws! See step 2.

Check www.TheUltimateLock.com to get information on installing the striker plate on a steel door frame.

Congratulations on purchasing the nest engineered deadbolt

lock on the market, The Ultimate Lock™. It is vital that your

lock is installed properly to provide the maximum protection

possible. Read these instructions completely before you begin

the installation. More information can be found at our website:

www.TheUltimateLock.com.

IMPORTANT: Register your lock’s serial number!

Go to www.TheUltimateLock.com and click the “Register Your

Lock” link.

• No. 1 and No. 2 Phillips Screw drivers or bits

• Pencil or steel marking pawl

• Electric drill (3/8" chuck) with torque adjustment

• Drill bits:

1/16"(1.5 mm)

3/32" (2.5 mm)

1/8" (3 mm)

9/64" (3.5 mm)

5/32" (4 mm) (supplied in kit)

• Spade bit or forester bit: 3/4", and 1"

• Hammer, steel center punch, and 1/2" and 3/4"

chisels

• Small carpenter’s square (adjustable)

• Pliers (needle nose and regular)

• Spray lubricant (dry Teon, Silicon Spray, or similar)

• Tape measure or 12-inch ruler

• (If no deadbolt installed) Wood or bi-metal hole

saw: 2-1/8" and 1"

• Wood chisel: 1/2" (13 mm)

• Small carpenters adjustable square

Every Ultimate Lock™ is thoroughly inspected before leaving the factory. It is warranted to be free of defects from workmanship and materials for a period

of TEN YEARS from the date of original purchase. Should any trouble develop during the TEN YEAR period, return the complete lock system, freight

prepaid, to Ultimate Lock, Inc. at 3776 Greenbriar Dr., Stafford, TX 77477 or call 1-866-MLS-4005 (1-866-657-4005) for one of Ultimate’s Authorized Service

Centers nearest you. If our inspection shows the trouble was caused by defective workmanship or material, Ultimate Lock™ will repair (or at our option)

replace the lock without charge. Register your Serial Number on line at www.theultimatelocksystems/warranty.com This Warranty does not apply where:

• Repairs have been made or attempted by others

• Repairs are required because of normal wear and tear

• The lock has been abused, misused or improperly installed

• Alterations have been made to the lock or its components

In no event shall Ultimate Lock™ be liable for any indirect, incidental or consequential damages from the sale or use of the product. This disclaimer applies

both during and after the term of the warranty. Ultimate Lock™ disclaims liability for any implied warranties, including implied warranties of “merchantability”

and “tness for a specic purpose”, after the TEN-year term of this warranty. This warranty gives you specic legal rights, and you may also have other

rights, which vary from state to state. Some states do not allow the exclusion or the limitation of incidental or consequential damages, so the above limitation

or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

*Disclaimer: The Ultimate Lock is only as strong as your door frame. Please contact your local locksmith to visit your home and evaluate your current setup.

Before You Start

Tools You Will Need

A Note About Steel Doors

Limited Warranty

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - Limited Warranty

The Ultimate Lock™ 3000 Series Installation Guidea. This lock is designed for a right- or left-handed door that opens into the home or ofce with a

Page 2 - 1. Identify Your Parts

1. Identify Your PartsCarefully unpack and check that all parts are in the package. Identify parts and hardware from Figure 1. Record the Serial Numbe

Page 3 - 3. Measure and Mark

2. Reinforce Your Hinges3. Measure and Marka. It is very important to reinforce the hinges of your door to get maximum protection from forced entry.

Page 4 - 5. Measure and Mark Holes

For steel doors with steel door jambs: When installing the Ultimate Lock™ in steel doors or wood doors installed in steel door frames that have not y

Page 5 - 8. Install Key Lock

7. Install Deadbolt8. Install Key Locka. Look at your door from the inside of the house or room and note if the hinges are on the right or left side

Page 6 - 10. Final Lock Assembly

a. Apply a dry, multipurpose lubricant to moving parts (teeth of gear, and security bar).b. Position security bar in place and start gear into hole

Page 7 - 11. Install Striker Plate

11. Install Striker PlatePlatformDecorativeCoverTwist KnobHousing321a. Remove the old deadbolt striker plate from the door frame. Close the door and

Page 8

OperationNon-standard InstallationsThe Ultimate Lock™ utilizes two deadbolts that work in unison—a mortise deadbolt and a rim deadbolt. The secondary

Comments to this Manuals

No comments

Millennium Lock Residential - 3000 Series - PB Instruction Manual

Browse online or download Instruction Manual for Garage Door Opener Millennium Lock Residential - 3000 Series - PB. Millennium Lock Residential - 3000 Series - PB Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals